Sony ICD-UX523BLK - Manual (Page 96)

  Utilizing Your Computer
Table of
Cont
ents
Inde
x
ModelName: ICD-UX522/UX522F/UX523/UX523F
PartNumber: 4-293-033-11
Connecting the IC recorder to your computer
To USB port of your computer
IC recorder
Your computer
To exchange files between the IC recorder and your computer, connect the IC
recorder to your computer.

Slide the USB DIRECT slide lever on the back of the IC recorder, and
insert the USB connector into the USB port of a running computer.

Make sure the IC recorder has been recognized properly.
On the Windows screen; open “My Computer” or “Computer,” and make
sure that “IC RECORDER” or “MEMORY CARD” has been recognized.
On the Macintosh screen; make sure that an “IC RECORDER” or
“MEMORY CARD” drive is displayed on the Finder.
The IC recorder is recognized by the computer as soon as the connection is
made. While the IC recorder is connected to the computer, “Connecting” is
displayed in the display window of the IC recorder.
If the IC recorder cannot be connected to a computer directly, use the supplied
USB connection support cable.
USB connection support
cable (supplied)