Sony KDL-V40XBR1 - Manual (Page 18)

Introducing the TV
18
* Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.
Jack Description
1 HDMI 6 IN
HDMI/
R-AUDIO IN-L HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-digital
audio/video interface between this TV and any HDMI-equipped audio/video component, such
as a set-top box, DVD player, and A/V receiver. HDMI supports enhanced, or high-definition
video, plus two-channel digital audio.
The AUDIO IN (L/R) of HDMI IN is for DVI connection. For details, see page 27.
2 VIDEO 1 IN
S VIDEO Connects to the S VIDEO output jack of your VCR or other video equipment that has
S VIDEO. S VIDEO provides better picture quality than the composite video (3) connection.
3 VIDEO 1/3 IN
VIDEO/
L (MONO)-
AUDIO-R Connect to the composite video and audio output jacks on your VCR or other video
component. A third composite video and audio (VIDEO/HD/DVD 2 IN) is located on the left
side panel of the TV.
4 HD/DVD 4/5 IN
(1080i/720p/
480p/480i)/
L-AUDIO-R Connect to your DVD player’s or digital set-top box’s component video (YP
B
P
R
) and audio
(L/R) jacks.
Component video provides better picture quality than the S VIDEO (2) or the composite
video (3) connections.
5 OPTICAL OUT
(PCM/DOLBY
*
DIGITAL)
Connects to the optical audio input of a digital audio component that is PCM/Dolby Digital
compatible.
6 AUDIO OUT
(VAR/FIX) Connect to the left and right audio input jacks of your audio or video equipment. You can use
these outputs to listen to your TV’s audio through your stereo system.
7 PC 7 IN
(AUDIO/RGB) Connects to personal computer’s video and audio output connectors.
Can be connected to other Analog RGB devices such as Video Conferencing or Set-top Boxes.
See “PC Input Signal Reference Chart” on page 89 for the signal to be displayed.
8 CableCARD slot CableCARD device provides cable subscribers with access to secure, digitally encrypted cable
channels
— without the need for a set-top box — that will enable you to receive not only
standard definition but also high definition television. For details, see page 29.
9 AC IN Connects the supplied AC power cord.
0 CABLE RF input that connects to your cable signal.
qa VHF/UHF RF input that connects to your VHF/UHF antenna.