Selecting pc screen options – Sony KDL-V40XBR1 User Manual
Page 79
Using the Settings
79
Using the
Settings
Selecting PC Screen
Options
To display the PC screen:
Press
TV/VIDEO
repeatedly on
the remote control until
Video 7
(PC) appears.
The PC Input Screen setting includes the following options:
You can change the settings for the PC input while the TV is
displaying the PC screen.
Option
Description
Wide Mode
Normal
Select to display the picture in its original size.
Full 1
Select to enlarge the picture to fill the display
area, keeping its original horizontal-to-vertical
aspect ratio.
A black frame will appear on the
surrounding of the picture.
Full 2
Select to enlarge the picture to fill the display
area.
A black frame will appear on the
surrounding of the picture.
Zoom
Select to enlarge the picture horizontally and
vertically to an equal aspect ratio that fills the
wide screen.
Auto
Adjustment
Select to automatically adjust the display position and phase of
the picture when the TV receives an input signal from the
connected PC.
Note that
Auto Adjustment
may not work well with certain
input signals. In such cases, manually adjust the options below.
Phase
Select to adjust the phase when the screen flickers.
Pitch
Select to adjust the pitch when the picture has unwanted
vertical stripes.
Horizontal
Center
Select to adjust the horizontal position of the picture.
Allows you to move the picture left and right in the window.
Press
B or b
and press
to choose a correction.
Vertical Center
Select to adjust the vertical position of the picture.
Allows you to move the picture up and down in the window.
Press
B or b
and press
to choose a correction.
Video 7
PC
Screen
Press WEGA GATE to exit
Wide Mode
Full 1
Auto Adjustment
Phase Min
Pitch 0
Horizontal Center
0
Vertical Center
0
z
When there is no signal
input, no options can be
selected.
z
Select Zoom in the
Wide Mode option to
display movies and
other content on DVD,
using the entire
viewable area of the
screen.
z
Adjustment range for
Horizontal Center and
Vertical Center is
adjusted according to
the input signal.