Sony KDL-V40XBR1 - Manual (Page 33)

Connecting the TV
33
Connec
ting the TV
VCR and Cable For best results, use this connection if:
s You have cable TV that does not require a cable box.
Disconnect all power sources before making any connections.
1
Connect the CATV cable to the single (input) jack of the splitter.
2
Use a coaxial cable to connect one of the output jacks of the splitter to
the TV’s CABLE input jack.
3
Use a coaxial cable to connect the splitter’s other output jack to the
VCR’s input jack.
4 Use A/V and S VIDEO cables to connect the VCR’s AUDIO and
S VIDEO OUT jacks to the TV’s AUDIO and S VIDEO IN jacks.
CABLE
VHF/UHF
S VIDEO
VIDEO
AUDIO
VIDEO IN
L
(MONO)
R
1 3 Coaxial cable
Rear of TV
VIDEO
CATV Cable
VCR
A/V cable
S VIDEO
S VIDEO cable
Coaxial cable
AUDIO-L
AUDIO-R
Splitter
Cables are often
color-coded to connectors.
Connect red to red,
white to white, etc.
If your VCR is not equipped with S VIDEO, use a VIDEO cable
(yellow) instead of the S VIDEO cable.