Sony KDL-V40XBR1 - Manual (Page 38)

Connecting the TV
38
DVD Player with
S VIDEO and Audio
Connectors For best results, use this connection if:
s Your DVD player does not have component (YP B P R ) jacks.
Disconnect all power sources before making any connections.
1
Use an A/V cable to connect the DVD player’s AUDIO OUT jacks to
the TV’s AUDIO IN jacks.
2 Use an S VIDEO cable to connect the DVD player’s S VIDEO OUT
jack to the TV’s S VIDEO IN jack.
S VIDEO
VIDEO
AUDIO
VIDEO IN
L
(MONO)
R
1 3
DVD player
Rear of TV
A/V cable
S VIDEO cable
S VIDEO
AUDIO-R
VIDEO
AUDIO-L
Cables are often
color-coded to connectors.
Connect red to red, white
to white, etc.
If your DVD player is not equipped with S VIDEO, use a VIDEO
cable (yellow) instead of the S VIDEO cable.
To watch the DVD, press TV/VIDEO repeatedly to select the
DVD input (VIDEO 1 in the illustration). If you have a non-Sony
DVD player, and want to set up the TV remote control to
operate the DVD player you must program the remote control.
See “Programming the Remote Control” on page 44.
To control DVD functions with the TV remote control, see
“Operating a DVD Player or DVD Changer” on page 46.
To easily identify equipment connected to the TV, see the
instructions for setting up Label Video Inputs on page 85.