Sony STR-DH750 - Manual (Page 114)

MULTI CHANNEL AV RECEIVER
STR-DH750/STR-DH550
Enjoying sound of TV broadcasts from the receiver
If your TV supports the Audio Return Channel (ARC) function, set the receiver by the following procedure to
output the sound of the TV from the speakers connected to the receiver.
1. Select [Settings] - [HDMI Settings] from the home menu.
2. Select [Control for HDMI].
3. Select [On].
If you connect to a TV that is not compatible with the Audio Return Channel (ARC) function or
you want to select an audio signal using a cable other than an HDMI cable (e.g. via an optical
digital cable or an audio cable)
Switch the audio input mode. For details, see “ Switching between digital and analog audio (Input Mode) .”
Note
Be sure to turn off the volume of the TV or activate the muting function of the TV.
If your TV does not support the System Audio Control function, set [HDMI Audio Out] to [TV+AMP] in the
HDMI Settings menu to output the sound of the TV from the TV speaker and the speakers connected to the
receiver.
Related Topic
Switching between digital and analog audio (Input Mode)
Connecting a TV
Notes on use
4-488-933-11(1)
Copyright 2014 Sony Corporation
Help Guide
107