Avaya 1150E - Manual (Page 37)

Connecting the components
37
Before you begin
Connecting the components of the phone
1. Remove the stand cover. Pull upward on the center catch as
indicated in Figure 5, "Removing the stand", on page 38, and remove
the stand cover. The cable routing tracks are now accessible.
CAUTION
Damage to Equipment
Do not plug your Avaya 1150E IP Deskphone
into a regular telephone jack. This results in
severe damage to the IP Deskphone. Consult
your system administrator to ensure that you
plug your telephone into a 10/100BaseT
Ethernet jack.
CAUTION
Your Avaya 1150E IP Deskphone is designed
for use in an indoor environment only.
WARNING Your Avaya 1150E IP Deskphone is shipped
with the base locked in position. To avoid damaging
your phone, press the wall-mount lever, located under
the base, to release the stand and pull it away from the
phone.