Sony SVT11213CXB - Manual (Page 190)

Note
With the USB charging settings enabled, power consumption when your VAIO computer is off
or in Hibernate mode or Sleep mode increases because the computer supplies power to the
USB port even when a USB device is not connected to the port.
When the USB charging settings are enabled, you cannot use the remote wake-up function
on the USB device connected to the USB port that supports USB charging.
Hint
The USB charging settings are disabled by default.
Connecting a USB Device
You can connect a Universal Serial Bus (USB) device such as a mouse, floppy disk drive,
speaker or printer to your VAIO computer.
Installation of the device driver supplied with the USB device may be required when connecting.
Refer to the manual that came with the device for more information.
1. Choose the USB port ( ) you prefer to use.
2. Plug the USB device cable ( ) (not supplied) into the USB port.
Note
You may need to install the driver supplied with your USB device before use. Refer to the
manual that came with the USB device for more information.
In order to print documents, be sure the USB printer is compatible with your version of
Windows.
Before disconnecting USB speakers from your VAIO computer, stop DVD or music playback
or turn off the computer. If you disconnect the USB speakers during playback, it may cause a
malfunction.
For information on how to remove a USB device, refer to the manual that came with the
device.
To protect your VAIO computer and/or USB devices from damage, observe the following:
When moving your VAIO computer with USB devices connected, avoid exposing the USB ports to shock
or impact.