General functions and controls - player unit – American Audio CDG-350 User Manual

Page 10

Advertising
background image

©

American Audio

®

- www.AmericanAudio.us - CDG-350 Instruction Manual Page 10

GENERAL FUNCTIONS AND CONTROLS - PLAYER UNIT

Figure 6

Figure 5

PLAYER UNIT - FACE (FIGURE 5)

21. DRIVE 1 TRANSPORT TRAY - This tray is used to load and unload a compact disc into the drive
1 mechanism. The tray is opened and closed by pressing the DRIVE 1 OPEN/CLOSE BUTTON (22).
Never attempt to force the transport tray open or closed when the power is turned off.
22. DRIVE 1 OPEN/CLOSE (Transport Tray Open/Close) - This button is used to open and close
the drive 1 transport tray. NOTE: When a disc is already loaded in the transport tray, the tray will not
open unless the unit is in pause or cue mode.
23. POWER SWITCH - This switch is used to control the unit's main power. A blue LED directly above
the power switch will glow to indicate main power is active.
24. DRIVE 2 OPEN/CLOSE (Transport Tray Open/Close) - This button is used to open and close
the drive 2 transport tray. NOTE: When a disc is already loaded in the transport tray, the tray will not
open unless the unit is in pause or cue mode.
25. DRIVE 2 TRANSPORT TRAY - This tray is used to load and unload a compact disc into the drive
2 mechanism. The tray is opened and closed by pressing the DRIVE 2 OPEN/CLOSE BUTTON (24).
Never attempt to force the transport tray open or closed when the power is turned off.

TRANSPORT UNIT - REAR (FIGURE 6)

26. SWITCHED VIDEO OUT - Connect a video cable to this output and the video signal can be
switched between Deck 1 & Deck 2 using a "Q" Start Mixer.

21

22 23 24

25

27

26

28

33

32

31 30

29

34

35

36

Advertising