American Audio CDG-350 - Manual (Page 16)

© American Audio ® - www.AmericanAudio.us - CDG-350 Instruction Manual Page 16
BASIC OPERATIONS (CONT)
Activating the Pitch Slider (13): To activate the
PITCH SLIDER (13), turn the pitch function on.
Press the PITCH BUTTON (10) to turn on the
pitch function, when the pitch function is activat-
ed a LED will begin to glow. If the pitch function is
not activated neither the PITCH SLIDER (13) nor
the PITCH BEND BUTTONS (9) will function.
9. PITCH ADJUSTMENTS:
This function will increase or decrease a tracks playback speed or "PITCH," this is not a momentary
change as in "PITCH BENDING" (see page 17). The maximum pitch bend percentage of the PITCH
SLIDER is +/-16%. The PITCH SLIDER (13) is used to decrease or increase the playback pitch. If the
slider is move up (towards the top of the unit) the pitch will decrease, if the slider is moved down
(towards the bottom of the unit) the pitch will increase.
Using the Pitch Slider (13): To use the PITCH
SLIDER (13) slide the slider up and down. Down will
increase the pitch and up will decrease the pitch.
Figure 12
Figure 11
Using the Pitch Slider Percentage Selector (6): You may
choose a pitch operating range at any time. To change
the operating range be sure the pitch function is turned
on, see figure 10. The pitch percentage can be changed
between +/-8%, +/-12%, and +/-16%. 8% will allow the
least amount of pitch manipulation and 16% will allow the
most amount of pitch manipulation. To adjust the different
values, press the PITCH ON/OFF BUTTON (10) and Tap on
the % BUTTON (6) until your desired value is reached.
Figure 10