Set-up, Customer support – American Audio CDG-350 User Manual

Page 6

Advertising
background image

SET-UP

©

American Audio

®

- www.AmericanAudio.us - CDG-350 Instruction Manual Page 6

CUSTOMER SUPPORT

Customer Support:

American Audio

®

provides a toll free customer support line, to provide set up help and

to answer any question should you encounter problems during your set up or initial operation. You may also visit
us on the web at www.AmericanAudio.us for any comments or suggestions. For service related issue please
contact American Audio

®

. Service Hours are Monday through Friday 9:00 a.m. to 5:00 p.m. Pacific Standard

Time.

Voice:

(800) 322-6337

Fax:

(323) 582-2941

E-mail:

[email protected]

Warning!

To prevent or reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture.

Caution!

There are no user serviceable parts inside this unit. Do not attempt any repairs yourself, doing so will

void your manufactures warranty. In the unlikely event your unit may require service please contact customer
support. Please do not return to your dealer without first contacting customer support.

CAUTION:
• The player will work normally when the main unit is
mounted with the front panel within 15 degrees of
the vertical plane. If the unit is tilted excessively,
discs may not be loaded or unloaded properly.
(Figure 1)

CAUTION:
• The LCD is designed to be clearly visible within the
angles shown in Figure 2. Mount the control unit
so that the visual angle is within this range.

Figure 2

Figure 1

1. Checking the Contents:
Be sure your CDG-350 was shipped with the following:

1) CDG-350 Dual CD player unit.

1) CDG-350 Controller Head Unit

2) Dual Male to Male RCA cable.

1) Warranty card.

1) Operating instructions (this booklet).
2. Installing the Units
1) Place your unit on a flat surface or mount it in a secure rack mount case.
2) Be sure the player is mounted in a well ventilated area where it will not be exposed to direct sunlight,
high temperatures, or high humidity.
3) Try to place the unit as far as possible from TVs and tuners, as the unit may cause undesirable

interference.

3. Connections
1) Be sure main power is connected last to prevent any electrical damage.
2) AUDIO CONNECTIONS: Use the included RCA cable to connect the CDG-350 outputs to the

line inputs of a mixer. Never connect a CD player's output to a mixers "phono" inputs.


CAUTION: Be sure to use the supplied control cables. Using a different type of cable may result in unit damage.
To avoid server unit damage, be sure main power is off when connecting the control cables.

45°

Please Note: All specifications and improvements to and in the design of this unit and this manual
are subject to change at any time without any prior written or published noticed.
For service parts visit http://parts.americandj.com

Advertising