American Audio CDG-350 - Manual (Page 18)

Be sure a disc is inserted in the drive and press
the PROGRAM BUTTON (1). Pressing the PROGRAM
BUTTON (1) from any function will immediately pause the
disc and enter the program mode.
After activating the program mode the PROGRAM INDI-
CATOR (47) in the LCD (8) will begin to glow indicating
Program Mode has been activated.
11. PROGRAM PLAY
This operation allows you to customize your disc playback. You may select specific tracks to played
and the order they will be played in. You may program a maximum of 20 tracks at once and program
a single track to played more than once. To create a program:
Figure 16
Select a track to be programmed by using the
FORWARD TRACK SKIP (16) and BACKWARD
TRACK SKIP BUTTONS' (16).
Once you reach the track you wish to place in to the pro-
gram memory pressing PROGRAM BUTTON (1) will lock
the track into memory.
Figure 18
Figure 17
Repeat these steps three and four up to 19 times (up to 20 tracks may be programmed).
As you program tracks into memory, the LCD (8) will indicate how many tracks have been pro-
grammed.
When you have finished your programming and are ready to
begin playback simply press the PLAY/PAUSE BUTTON
(14) and your program will begin to play.
After you have complete your program you can always
add more tracks to your program by repeating the steps.
Remember that you can only a maximum of 20 tracks in a
program and you can only add track not subtract.
To cancel and clear the program press and hold down the
PROGRAM (2) for more than two seconds.
Figure 19
BASIC OPERATIONS (CONT)
© American Audio ® - www.AmericanAudio.us - CDG-350 Instruction Manual Page 18