Sony DCR-TRV820 - Manual (Page 109)

109
Printing operations
Using the printer – Introduction
Inserting the print paper
Be sure to use the specified print paper.
(1) Set the POWER switch to MEMORY or VTR. Make sure that the LOCK is set to
the right (unlock) position.
(2) Open the LCD panel while pressing OPEN.
(3) Slide the printer cover in the direction of the arrow to open.
The PRINT lamp is lit, and the PRINT PAPER lamp flashes slowly.
(4) Insert print paper into the part of the paper feeder marked with making
sure that the print surface is facing towards you.
Insert the print paper until less than 3 cm of print paper is protruding from
your camcorder.
Press the print paper into the paper feeder for about two seconds after the
beep. The print paper starts to be automatically drawn in.
Printer cover
Less than
3 cm
3
4
PRINT CARTRIDGE
lamp
PRINT PAPER lamp
PRINT lamp