Sony DCR-TRV820 - Manual (Page 90)

90
To stop copying
Press MENU to stop copying.
When the memory of the “Memory Stick” is full
MEMORY FULL appears on the LCD screen, and the copying stops. Insert another
“Memory Stick” and repeat the procedure from step 2.
When the access lamp is lit or flashing
Do not shake or strike your camcorder. As well do not turn the power off, eject the
“Memory Stick” or remove the battery pack. Otherwise, the image data breakdown may
occur.
To record all the images recorded on the tape
Rewind the tape all the way back and start copying.
If the write-protect tab on the “Memory Stick” is set to LOCK
NOT READY appears when you select PHOTO SAVE in the menu settings.
When you change the “Memory Stick” in the middle of copying
Your camcorder resumes copying from the last image recorded on the previous
“Memory Stick”.
Copying still images from a tape – Photo save