Sony DCR-TRV820 - Manual (Page 114)

114
Making prints – Standard print
Making prints from other equipment
Before operation
Be sure to use a fully charged battery when using the battery to make prints.
(1) Insert the print cartridge. (p. 106)
(2) Set the POWER switch to VTR on your camcorder.
(3) Set DISPLAY to LCD in the menu settings. (p. 65)
(4) Press N on the VCR to start playback if you record a tape from VCR.
Select TV program if you are recording from TV.
The picture from a TV or VCR appears on the LCD screen.
(5) Open the LCD panel and the printer cover, then make sure that the PRINT
PAPER lamp is flashing slowly. Insert the print paper. (p. 109)
(6) Perform steps 4 to 7 on page 112.
Using the A/V connecting cable
Connect the yellow plug of the A/V connecting cable to the video jack on the VCR or
the TV.
If your TV or VCR has an S video jack
Connect using an S video cable (not supplied) to obtain high-quality pictures. With this
connection, you do not need to connect the yellow (video) plug of the A/V connecting
cable. Connect an S video cable (not supplied) to the S video jack of both your
camcorder and the TV or VCR.
TV
VCR
S VIDEO
VIDEO
OUT
AUDIO/VIDEO
S VIDEO
: Signal flow