Sony RM-NU1 - Manual (Page 27)

27 GB
Ne
twor
k co
nne
ction
s
7
Tap “OK.”
“Connection is complete.” appears.
Refer to “Network connection” (page 72), if
you were unable to make the desired network
connections.
8
Make the server settings.
To enjoy content stored on the server over the
network that has been set up in this section,
you need to set up your server first (page 32).
Setting up a wireless network
using the PIN code method
If the access point supports the WPS PIN (Personal
Identification Number) code connection, you can
set up a WPS wireless connection by entering the
unit’s PIN code into the wireless LAN router/
access point.
1
Press HOME on the unit.
The HOME screen appears.
2
Tap “ Settings.”
The settings menu appears.
3
Tap “Network Settings.”
The connection type screen appears.
4
Tap “Manual Registration,” then tap
“
Next b .”
5
Tap “WPS PIN Method,” then tap
“
Next b .”
The unit’s PIN code (8 digits) is displayed.
Keep the PIN code display on the screen until
you finish entering the PIN code in the
wireless LAN router/access point. (A
different PIN code will be displayed each
time you perform this operation.)
6
Input the unit’s PIN code into the
wireless LAN router/access point.
For details on entering the PIN code, refer to
the operating manual of the wireless LAN
router/access point.
7
Tap “ Next b .”
A confirmation screen appears.
It may take a while for the unit to complete
the network settings.
8
Tap “OK.”
“Connection is complete.” appears.
Refer to “Network connection” (page 72), if
you were unable to make the desired network
connections.
9
Make the server settings.
To enjoy content stored on the server over the
network that has been set up in this section,
you need to set up your server first (page 32).