Sony RM-NU1 - Manual (Page 55)

55 GB
Using A
c
tivity
About an infrared Activity
This function allows you to turn the power supply
on and carry out input operations automatically
just by tapping the infrared Activity icon.
While the Activity is being carried out, you can
also control each device by tapping the
corresponding remote key.
Note
The power operation of each device is registered
automatically when you register the Activity.
Registering an infrared
Activity
You can register several commands in a sequential
order on a registered device as an Activity after
registering the desired device.
This section explains how to enjoy video content
from a BD player with a TV and a receiver.
Tip
The following steps change depending on the selected
Activity and devices.
Note
You have to register infrared devices you want to use with
this unit in advance. Refer to “Adding and using infrared
devices” (page 49) for details on how to register infrared
devices.
1
Register the BD player, TV and
receiver you want to use with this
unit (page 49).
2
Press HOME on the unit.
The HOME screen appears.
3
Tap the “ Activity ” tab.
4
Tap “ Add Activity.”
5
Tap “Watch video (IR)” then tap
“Next
b.”
Tip
The Activity type is displayed under the Activity
name.