Sony RM-NU1 - Manual (Page 64)

64 GB
11
Tap the desired input operation of
the device for outputting sound,
then tap “OK.”
A confirmation screen appears.
Tip
If you do not want to switch the input, tap “No input
switching,” then tap “Next
b.”
12
Tap “OK.”
Tip
Refer to “Start Action Test” (page 62).
Adding an air-conditioner’s
functions to this unit
If you adjust the setting of an air-conditioner
according to the season, reset the parameters of the
air conditioner’s remote control (temperature, air
strength and direction, etc.), and register the new
remote signals with the unit.
When the power button on the remote control for
an air-conditioner, etc., toggles between power-on
and off with each press, the power-on/off operation
may not be registered correctly. In this case,
register the power-on/off signals to two separate
keys of the remote screen.
1
Register the power-on signal to a
key (transmit the power-on signal by
pressing the power button when the
device is turned off).
2
Register the power-off signal to
another key (transmit the power-off
signal by pressing the power button
when the device is turned on).
The two learned keys of the unit now control
the power-on/off signals of the device,
respectively.
Note
Devices such as air conditioners and heaters receiving an
infrared signal can be dangerous if misoperated.