Sony DCR-TRV30 - Manual (Page 100)

100
Icon/item
FRAME REC
INT. REC
FLASH LVL
HiFi SOUND
AUDIO MIX
A/VtDV OUT
LCD B. L.
LCD COLOR
VF B.L.
Mode
z OFF
ON
ON
z OFF
SET
HIGH
z NORMAL
LOW
z STEREO
1
2
——
z OFF
ON
z BRT NORMAL
BRIGHT
——
z BRT NORMAL
BRIGHT
Meaning
To deactivate Cut recording function.
To activate Cut recording function (p. 58).
To activate Interval recording function (p. 56).
To deactivate Interval recording function.
To set waiting time and recording time for
Interval recording function (p. 56).
Makes the flash level higher than normal.
Normal setting.
Makes the flash level lower than normal.
To play back a stereo tape or dual sound track
tape with main and sub sound (p. 165).
To play back a stereo tape with the left sound or
a dual sound tape with main sound.
To play back a stereo tape with the right sound
or a dual sound track tape with sub sound.
To adjust the balance between the stereo 1 and
stereo 2 (p. 89).
To output digital images and sound in analog
format using your camcorder.
To output analog images and sound in digital
format using your camcorder. (p. 81)
To set the brightness on the LCD screen normal.
To brighten the LCD screen.
To adjust the color on the LCD screen, turn and
press the SEL/PUSH EXEC dial.
To set the brightness on the viewfinder screen to
normal.
To brighten the viewfinder screen.
Changing the menu settings
POWER
switch
CAMERA
CAMERA
CAMERA
MEMORY
VCR
VCR
VCR
VCR
CAMERA
MEMORY
VCR
CAMERA
MEMORY
VCR
CAMERA
MEMORY
ST1 ST2
Notes on LCD B.L. and VF B.L.
• When you select BRIGHT, battery life is reduced by about 10 percent during
recording.
• When you use power sources other than the battery pack, BRIGHT is automatically
selected.
To get low-
intensity To get high-
intensity