Sony DCR-TRV30 - Manual (Page 160)

160
Symptom Cause and/or Corrective Actions
• Moisture condensation has occurred.
c Remove the cassette and leave your camcorder for at
least one hour to acclimatize. (p. 171)
• Some troubles have occurred in your camcorder.
c Remove the cassette and insert it again, then operate
your camcorder.
• The battery pack is not properly installed.
c Install it properly. (p. 12)
• Something is wrong with the battery pack.
c Contact your Sony dealer or local authorized Sony
service facility.
• The POWER switch is not set to OFF (CHG).
c Set it to OFF (CHG).
• Disconnect the power cord of the AC power adaptor or
remove the battery, then reconnect it in about one minute.
Turn the power on. If the functions still do not work, open
the LCD panel and press the RESET button under
rREC
button using a sharp-pointed object. (If you press the
RESET button, all the settings including the date and time
return to the default.) (p. 182)
• Your camcorder is not a malfunction.
The melody or beep sounds for
5 seconds.
Types of trouble and their solutions
When you set the POWER switch to
VCR or OFF (CHG), if you move
your camcorder, you may hear a
clatter sound from inside your
camcorder.
No function works though the power
is on.
You cannot charge the battery pack.
While charging the battery pack, no
indicator appears or the indicator
flashes in the display window.