Sony DCR-TRV30 - Manual (Page 58)

58
Frame by frame recording – Cut recording
You can make a recording with a stop-motion animated effect using cut recording. To
create this effect, alternately move the subject a little and make a cut recording. We
recommend that you use a tripod, and operate the camcorder using the Remote
Commander after step 6.
(1) Press MENU to display the menu in standby mode.
(2) Turn the SEL/PUSH EXEC dial to select , then press the dial.
(3) Turn the SEL/PUSH EXEC dial to select FRAME REC, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select ON, then press the dial.
(5) Press MENU to erase the menu display.
The FRAME REC indicator lights up.
(6) Press START/STOP to start cut recording. The camcorder makes a recording
for about six frames, and returns to recording standby.
(7) Move the subject, and repeat step 6.
To cancel the cut recording
• Set FRAME REC to OFF in the menu settings.
• Set the POWER switch to OFF (CHG), VCR, or MEMORY.
Notes on cut recording
• The last recorded cut is longer than other cuts.
• The proper remaining tape time is not indicated if you use this function continuously.
1 6
5
FRAME REC
CAMERA SET
D ZOOM OFF
16 : 9W I DE
STEADYSHOT
N. S. L I GHT
FRAME REC
I NT. REC
FLASH LVL
[MENU] : END
CAMERA SET
D ZOOM
16 : 9W I DE
STEADYSHOT
N. S. L I GHT
FRAME REC
I NT. REC
FLASH LVL
RETURN
OFF
ON
[MENU] : END
CAMERA SET
D ZOOM
16 : 9W I DE
STEADYSHOT
N. S. L I GHT
FRAME REC
I NT. REC
FLASH LVL
RETURN
ON
[MENU] : END
2-4
MENU
MENU