Sony DCR-TRV30 - Manual (Page 30)

30
To display the screen indicators – Display function
Press DISPLAY on your camcorder or the Remote Commander supplied with your
camcorder. The indicators appear on the screen. To make the indicators disappear,
press DISPLAY again.
Using the data code function
Your camcorder automatically records not only images on the tape but also the
recording data (date/time or various settings when recorded) (Data code).
Press DATA CODE in the playback mode.
The display changes as follows:
date/time t various settings (SteadyShot, exposure, white balance, gain, shutter
speed, aperture value mode) t no indicator
[a] SteadyShot off indicator
[b] Exposure mode indicator
[c] White balance indicator
[d] Gain indicator
[e] Shutter speed indicator
[f] Aperture value
Not to display various settings
Set DATA CODE to DATE in the menu settings (p. 105).
The display changes as follows: date/time y no indicator
Playing back a tape
DISPLAY
DATA CODE
Date/time Various settings
[f]
[a]
[c]
[d]
[e]
[b]
60 AWB
F1.8
9dB
AUTO
JUL 4 2001
12:05:56 AM
DISPLAY