Installing a memory module – Sony PCG-SRX99 User Manual
Page 111
Installing a Memory Module
To add a memory module, proceed as follows:
1.
Turn off the computer and all peripheral devices.
2.
Disconnect the power cord and all cables from the computer, and remove the battery.
3.
Wait for the computer to cool down.
The interior of the computer becomes extremely hot during operation. Wait at least one hour for the computer to
cool down before you remove the screws.
4.
Use an appropriate screwdriver to loosen and remove the three screws at the bottom of the computer.
To avoid damaging the computer, do not remove or loosen any other screws.
Rem ov ing Bottom Screws
5.
Slide the LCD lock lever and lift the cover.
6.
Slide the keyboard toward the LCD display, then lift it away slightly.
Lifting the Keyboard
7.
Lift the keyboard from the LCD display side.
8.
Gently turn the keyboard over the touchpad. Take care not to detach the cable when lifting the keyboard.
9.
Touch a metal object (such as the connector panel on the back of your computer) to discharge static electricity.
10. Remove the existing memory module.
11. Remove the new memory module from its packaging.
12. Install the memory module by sliding the module into the open slot.
Do not touch any part of the motherboard or the other components inside the computer.
Installing New Mem ory Module
Page 111