Sony PCG-SRX99 - Manual (Page 32)

Connecting to a LAN
You can connect your computer to 10BASE-T and 100BASE-TX-type Local Area Networks (LANs) by using the computer's
Ethernet port. For the detailed settings and devices needed to connect to the network, ask your network administrator.
Connecting to LAN
Warning: Only connect 10BASE-T and 100BASE-TX cables to the Ethernet port. Do not connect any
other type of network cable or any telephone line. Connecting cables other than those listed above may result in an
electric current overload and could cause a malfunction, excessive heat, or fire in the port. To connect the unit to the
network, contact your network administrator.
If you enable Wake on LAN, the power saving mode will be switched to Standby mode.
Page 32