Sony DCR-HC62 - Manual (Page 52)

52
CAMERA DATA (below)
Displays camera setting data.
A SteadyShot off
B Exposure
C White balance
D Gain
E Shutter speed
F Aperture value
b Notes
• The exposure adjustment value (0EV), a shutter
speed, and the aperture value appear when still
images on a “Memory Stick Duo” are played
back.
• In the [DATE/TIME] data display, the date and
time are displayed in the same area. If you
record a picture without setting the clock, [--- --
----] and [--:--:--] will appear.
• During Easy Handycam operation, you can set
[DATE/TIME] only.
B AUTO
Displays the remaining tape indicator for
about 8 seconds in situations such as those
described below.
• When you set the POWER switch to PLAY/
EDIT or CAMERA-TAPE with a cassette
inserted.
• When you touch (Play/Pause).
ON
Always displays the remaining tape
indicator.
The default setting is [ON], allowing you to
use the supplied Remote Commander
(p. 93).
z Tips
• Set to [OFF] to prevent your camcorder from
responding to a command sent by another VCR
remote control unit.
B ON
A beeping sound starts when you start/stop
recording, or operate the touch panel.
OFF
Cancels the beeping sound and shutter
sound.
B LCD PANEL
Shows displays such as the time code on
the LCD screen and in the viewfinder.
V-OUT/PANEL
Shows displays such as the time code on
the TV screen, LCD screen, and in the
viewfinder.
B NORMAL
Scrolls the menu items downwards by
touching .
OPPOSITE
Scrolls the menu items upwards by
touching .
B 5 min
The camcorder is automatically turned off
when you do not operate your camcorder
for more than approximately 5 minutes.
NEVER
The camcorder is not automatically turned
off.
REMAINING
REMOTE CTRL (Remote control)
0:00:00:00 60min
AWB 100
9dB F1. 8
AUTO
GUIDE
1
2
3
4
5 6
BEEP
DISP OUTPUT
MENU ROTATE
A.SHUT OFF (Auto shut off)
STANDARD SET menu (Continued)