Sony DCR-HC62 - Manual (Page 74)

74
Pictures from connected devices are
not displayed correctly.
• The input signal is not NTSC (p. 78).
Still pictures cannot be dubbed from
a tape to a “Memory Stick Duo.”
• You cannot record or a distorted picture
may be recorded if the tape has been used
repeatedly for recording.
The computer does not recognize
your camcorder.
• Install the “Picture Motion Browser”
(p. 65).
• The computer may not recognize your
camcorder for a few moments after you
connect it. Wait for a while.
• Disconnect USB devices other than the
keyboard, the mouse, and the camcorder
from the (USB) jack on the computer.
• Disconnect the cable from the computer
and camcorder, restart the computer, then
connect them again correctly.
You cannot install the supplied
software, “Picture Motion Browser,”
on a Macintosh computer.
• You can install “Picture Motion Browser”
only on a Windows computer.
Depending on the functions, you may not
be able to use them together. The following
list shows examples of menu items and
functions that cannot be used at the same
time.
Connecting to a computer
Functions that cannot be used
together
Not available If this function is set
backlight [FIREWORKS],
[SPOT METER],
[EXPOSURE]
[SCENE SELECT] NightShot plus,
[TELE MACRO],
[OLD MOVIE],
[SUPER NSPLUS],
[COLOR SLOW S]
[CANDLE],
[FIREWORKS],
[SPORTS] When the POWER
switch is set to
CAMERA-
MEMORY
[SPOT METER] NightShot plus,
[SUPER NSPLUS]
[EXPOSURE] NightShot plus,
[SUPER NSPLUS]
[WHITE BAL.] NightShot plus,
[SUPER NSPLUS]
[SPOT FOCUS] [SCENE SELECT]
[TELE MACRO] [SCENE SELECT],
during tape recording
[SUPER NSPLUS] [FADER],
[D.EFFECT]
[COLOR SLOW S] NightShot plus,
[SCENE SELECT],
[SUPER NSPLUS],
[FADER],
[D.EFFECT]
[DIGITAL ZOOM] [TELE MACRO]
[FADER] [CANDLE],
[FIREWORKS],
[SUPER NSPLUS],
[COLOR SLOW S],
[D.EFFECT]
[D.EFFECT] [CANDLE],
[FIREWORKS],
[SUPER NSPLUS],
[COLOR SLOW S],
[FADER]
[OLD MOVIE] [PICT.EFFECT],
[SCENE SELECT]
Not available If this function is set
Troubleshooting (Continued)