Sony XSP-N1BT - Manual (Page 15)

15
GB
2
Press
/ to select [RECENT CALL], then
press ENTER.
A list of the call history appears.
3
Press
/ to select a name or phone
number from the call history, then press
ENTER.
The phone call starts.
1
Press CALL.
2
Press
/ to select [DIAL NUMBER], then
press ENTER.
3
Press
/ to enter the phone number,
and lastly select [ ] (space), then press
ENTER*.
The phone call starts.
* To move the digital indication, press
/.
Note
[_] appears instead of [#] on the display.
1
Press CALL.
2
Press
/ to select [REDIAL], then press
ENTER.
The phone call starts.
You can store up to 6 contacts in the preset dial.
1
Select a phone number that you want to
store in the preset dial, from the
phonebook, call history or by inputting
the phone number directly.
The phone number appears in the display of
this unit.
2
Press and hold a number button (1 to 6)
until [MEM] appears.
The contact is stored in the selected preset
number.
1
Press SOURCE to select [BT PHONE].
2
Press a number button (1 to 6) to select
the contact you want to call.
3
Press ENTER.
The phone call starts.
You can make a call by saying the voice tag stored
in a connected cellular phone that has a voice
dialing function.
1
Press CALL.
2
Press
/ to select [VOICE DIAL], then
press ENTER.
Alternatively, press VOICE on the main unit
while the App Remote function is off.
3
Say the voice tag stored on the cellular
phone.
Your voice is recognized, and the call is made.
To cancel voice dialing
Press ENTER.
Available Operations during
Call
To preset the volume of the ringtone and
talker’s voice
You can preset the volume level of the ringtone and
talker’s voice.
Adjusting the ringtone volume:
Press VOL +/– while receiving a call.
Adjusting the talker’s voice volume:
Press VOL +/– during a call.
To adjust the volume for the other party (Mic
gain adjustment)
Press MIC.
Adjustable volume levels: [MIC-LOW], [MIC-MID],
[MIC-HI].
To reduce echo and noise (Echo Canceler/
Noise Canceler Mode)
Press and hold EC/NC.
Settable mode: [EC/NC-1], [EC/NC-2].
To transfer a call
In order to activate/deactivate the appropriate
device (this unit/cellular phone), press MODE or use
your cellular phone.
Note
Depending on the cellular phone, handsfree connection
may be cut off when call transfer is attempted.
To check the status of SMS/email*
flashes when a new SMS/email is received, and
stays lit when there are unread messages.
* Available only for a cellular phone supporting MAP
(Message Access Profile).
Calling by phone number input
Calling by redial
Presetting phone numbers
Calling by preset number
Calling by voice tags