Sony STR-DA6400ES - Manual (Page 133)

133 GB
Ad
justi
ng Se
ttings
* To activate the H.A.T.S. function, select “ON” for “CTRL FOR HDMI.”
To change the display
You can check the sound field, etc., by
changing the information on the display.
1 Press AMP.
The receiver can be operated using the
remote.
2 Select the input for which you want to
check the information.
3 Press DISPLAY repeatedly.
Each time you press DISPLAY, the display
will change as follows.
Input you selected
t Sound field type t
Stream Information t Input name ...
When listening to FM and AM radio
Station name
t Frequency t Sound field
type t Volume...
Index name appears only when you have
assigned one to the input or preset station.
Index name does not appear when only
blank spaces have been entered.
When tuning in a channel from a satellite
tuner
Channel name
t Channel number t
Category t Artist name t Song title t
Composer name (SIRIUS only) t Signal
strength t Sound field type
HDMI Settings CTRL FOR HDMI [xxx] OFF, ON OFF
AUDIO OUT [xxxxxx] TV+AMP, AMP AMP
SW LEVEL [xxxdB] AUTO, +10dB, 0dB AUTO
H.A.T.S. [xxx]* OFF, ON ON
VIDEO DIRECT [xxx] OFF, ON OFF
System Settings NAME IN ? [xxxxxxxx]
PARTY SETUP [xxxxxxx] ZONE2/3, ZONE2, ZONE3 ZONE2/3
12V TRIG. MAIN [xxxxx] OFF, CTRL, ZONE, INPUT OFF
12V TRIG. ZONE2 [xxxxx] OFF, CTRL, ZONE, MAIN OFF
12V TRIG. ZONE3 [xxxxx] OFF, CTRL, ZONE, MAIN OFF
RS-232C CONTROL [xxx] OFF, ON ON
SERVER [xxx] OFF, ON OFF
VERSION [x.xxx] – –
Menu Item Parameter Initial
setting