Sony STR-DA6400ES - Manual (Page 144)

144 GB
When selecting a learned input,
press the button used to learn that
function.
To erase the learned code
1 Press THEATER while pressing RM
SET UP.
2 Press the input button (VIDEO2 in the
example) for which you want to clear
the setting.
The input button flashes. (The RM SET UP
button remains lit.)
3 Press ?/1 for more than 1 second.
The input button flashes twice, repeatedly.
4 Press SHIFT, then press numeric
buttons (button 1 in the example) to
clear the stored setting.
The RM SET UP button flashes twice, then
the clearing process is completed.
When the clearing process fails, the RM
SET UP button flashes five times. Try to
perform process again from step 2.
Clearing all the contents
of the remote’s memory
1
Press and hold MASTER VOL –
first, then press ?/1, then press
AV ?/1.
The RM SET UP button flashes three
times.
2
Release all buttons.
All the contents of the remote’s memory
(e.g., all the programmed data) are
cleared.
Using a command that has been
learned
MASTER
VOL
?/1
AV ?/1