Sony STR-DA6400ES - Manual (Page 152)

152 GB
To operate the lighting, select
(
) on Common tab
* A lighting control unit is a device which can adjust
the brightness of two or more lights with a one-
touch operation.
Consult your installation dealer about lighting
control unit installation.
To make the on-screen remote
disappear
Press QUICK CLICK or RETURN/EXIT O.
D V/v/B/b,
Select V/v/B/b to select menu
items. Then press to enter
the selection.
E Menu
Select to display the menu of
components connected to the
receiver.
F Exit Select to exit the menu.
G Input
Select the input source of the
components connected to the
receiver.
Button Function
A Light Off
Select to turn off the power of
the lighting control unit.*
B Scene 1~16 Select to select a preset lighting
pattern.
C All Off
Select to turn down the
brightness of all the lights to the
minimum (putting out the
lights).
D Off Select to turn off a single light.
E Lower
Select to turn down the
brightness of all the lights at the
same time.
Button Function
F Toggle Select to switch the preset
lighting pattern.
G Raise
Select to turn up the brightness
of all the lights at the same time.
H On
Select to turn on a single light.
I All On
Select to turn up all the lights to
maximum brightness.
J Macro
Select to start a macro
programmed with Quick Click.
Button Function