Sony STR-DA6400ES - Manual (Page 160)

160 GB
Resetting the remote
code for Quick Click
1
Press AMP.
The receiver can be operated using the
remote.
2
Press MENU.
The menu is displayed on the TV screen.
3
Press V/v repeatedly to select
“ Settings,” then press or
b.
4
Press V/v repeatedly to select
“Quick Click,” then press or
b.
5
Press V/v repeatedly to select
“Source Component,” or
“Common Component,” then
press .
6
Press V/v repeatedly to select
the component you want, then
press .
7
Press V/v repeatedly to select
“Reset,” then press .
The confirming message appears on the
TV screen.
8
Press V/v repeatedly to select
“Yes,” then press .
All the contents of the selected input (e.g.,
all the programmed data) are cleared.
9
Repeat steps 6 to 8 to clear all
programmed data.
Note
The macro itself is not cleared. A default code will
be output when you have set a preset code or learned
code in the macro step.
AMP
V/v,
MENU