Sony PEG-NX80V - Manual (Page 108)

108
Performing the IR HotSync
®
operation
Exchanging and updating files/data using the HotSync
®
operation (Other HotSync
®
operations)
2
Click the HotSync icon in the Windows task tray (at the
bottom right of the taskbar) once again and select Setup
from the shortcut menu.
The Setup dialog box is displayed.
3
Click the Local tab.
4
Adjust the following settings as needed.
• Serial port : Specifies a virtual port for an infrared port. If you are not
sure of the connection port, refer to the Infrared Monitor in the
Control Panel .
• Speed : Determines the speed at which files/data are transferred. Try
the As Fast As Possible rate first, and adjust downward if you have
any problems.
5
Tap OK.
The IR HotSync
®
operation is enabled.
Note
When performing a local HotSync
®
operation with the cradle, you need to restore the
local HotSync settings.
b
For details, refer to “To restore the local HotSync settings” on page 109.