Sony PEG-NX80V - Manual (Page 162)

Using the Bluetooth™ function 162
Connecting to the Internet by communicating with a Bluetooth™ compatible
mobile phone
Tips
• The step in which the Passkey Input screen appears varies depending on the
mobile phone, and for some devices, the Passkey input screen does not
appear. In any case, follow the instructions shown on the screen and enter a
Passkey when required.
• Depending on the radio wave conditions, it may take time to complete a
Bluetooth™ compatible device discovery or establish communication.
• If it takes too long to perform a device discovery, tap Cancel on the discovery
screen, and conduct a discovery again.
• If the device discovery failed in detecting a device, conduct a discovery again.
Note
Enter a Passkey to activate security. If the security is off and you access the Internet
from your CLIÉ handheld through a Bluetooth™ compatible mobile phone, you
may be charged the telephone line rental fee that someone else should be paying for.
2 Setting up the network connection
You need to set up the network connection in the Preferences screen.
1
Tap the arrow V at the top right of the Preferences screen
to select Network.
2
Enter the information about your Internet Service Provider
(ISP).
1 Service
Select the service (ISP name) to be used.
If a service you want to use is not listed, select
New from the menu and
add the service name to the list.
2 User Name
Enter the user name specified by ISP.
Continued on next page
• • • • • • • • • • • • • • • • • • •