Sony PEG-NX80V - Manual (Page 126)

126
Performing the HotSync
®
operation via LAN (LANSync)
Exchanging and updating files/data using the HotSync
®
operation (Other HotSync
®
operations)
6
Tap OK.
The HotSync screen is displayed again.
Performing a LANSync operation
You can perform a LANSync operation when you have prepared your
computer settings, CLIÉ handheld settings, and Conduit Setup. Turn on the
computers and start the HotSync
®
Manager.
Note
To perform a LANSync operation, both computers connected to the cradle and
performing the HotSync
®
are required to be set for LANSync. On each computer, click
the HotSync icon in the Windows task tray (at the bottom right of the taskbar) and
make sure that Network in the shortcut menu is selected. If not, click Network to select
it.
1
Rotate the Jog Dial™ navigator to select the HotSync icon
on the Application Launcher screen and press the Jog Dial™
navigator.
The HotSync screen is displayed.
Tip
You can also tap the HotSync icon to display the HotSync screen.
2
Tap the HotSync icon.
The HotSync
®
operation starts.
A message will be displayed when the HotSync
®
operation is complete.