Sony PEG-NX80V - Manual (Page 81)

Customizing your CLIÉ™ handheld (Preferences) 81
Adding/Changing communication device
preferences
You can customize the preference for a communication device to be connected
to your CLIÉ handheld. The applications using the communication device will
comply with this preference.
1
Tap the arrow V at the top right of the Preferences screen
and select Connection.
2
Tap New.
To change the existing preference, tap the preference you want to change
and
Edit .
3
Enter the connection name in Name.
Enter a suitable name.
4
Tap the arrow V next to Connect to and select how you
connect your CLIÉ handheld to your computer.
5
Tap the arrow V next to Via and select what you use to
connect your CLIÉ handheld to your computer.
If you select a modem for Connect to
1 Tap the arrow V next to Dialing and select the type of line you want
to use.
The recommended setting is
TouchTone™ .
Do not select Rotary unless you are sure that the telephone service
being used is not TouchTone™ .
2 Tap the arrow V next to Volume and select the volume of the modem
speaker at the time of connection.
3 Tap Details .
4 Tap the arrow V next to Speed and select the maximum speed for the
transmission between the modem and CLIÉ handheld.
5 Tap the arrow V next to Flow Ctl and select the flow control of the
modem connection.
The recommended setting is
Automatic .
6 Enter the modem initialization command in Init String .
By default, it is set to either AT&FX4 or ATZ . If the modem
initialization command is not specified on the modem, changes are not
required.
7 Tap OK .
Continued on next page
• • • • • • • • • • • • • • • • • • •