Sony PEG-NX80V - Manual (Page 120)

120 Exchanging and updating files/data using the HotSync
®
operation (Other HotSync
®
operations)
Performing the HotSync
®
operation via a
network
You can perform the HotSync
®
operation via a network between your CLIÉ
handheld and the computer in the LAN of your office, depending on the
network environment of your office. For details, contact the administrator of
the remote access server.
Prior to performing the HotSync
®
operation via a network
Check the following items:
• Both your company’s network system and its remote access server support
TCP/IP.
• You have a remote access account.
Preparing your computer
1
Click the HotSync icon in the Windows task tray (at the
bottom right of the taskbar) and select Network from the
shortcut menu.
2
Click the HotSync icon in the Windows task tray (at the
bottom right of the taskbar) once again and select Setup
from the shortcut menu.
The Setup dialog box is displayed.
3
Click the Network tab.
4
Click the check box next to the user name for HotSync.
Click TCP/IP Settings and assign a subnet mask as needed. For details
on a subnet mask address, refer to the manual of your operating system or
contact the system administrator.
5
Click OK.
To operate HotSync
®
operations via a network, you must have network
administrator skills.
Continued on next page
• • • • • • • • • • • • • • • • • • •