Sony PEG-NX80V - Manual (Page 152)

Beaming 152
Beaming between your CLIÉ handheld and another Palm OS
®
PDA
Beaming information
You can beam the data on your CLIÉ handheld to another Palm OS PDA
device that has an IR port.
1
Select the data, category, or business card you want to
beam.
2
Tap the Menu icon.
The menu is displayed.
3
Tap one of the following:
• The Beam command for an individual record
• In Address only: Beam Business Card
• Beam Category
4
When the Beam dialog box is displayed, point the IR port of
your CLIÉ handheld directly to the IR port of another Palm
OS PDA device.
The Beam dialog box shows that the transfer is complete.
Tip
For best performance of the data exchange, keep 4 to 8 inches (approximately 10 to
20 centimeters) between your CLIÉ handheld and the other Palm OS PDA device.
Do not place any obstacle between the devices. The optimum distance for beaming
may vary depending on devices.
(Location of the IR port may
vary depending on your model.)