Sony NAS-SV20i - Manual (Page 33)

33 GB
E
n
jo
yi
ng aud
io
co
nte
n
t
Enjoying audio content
Listening to an iPod or iPhone
You can operate your iPod/iPhone with the remote
control and listen to audio content stored on your
iPod/iPhone. See “Compatible iPod/iPhone
models” (page 73) for iPod/iPhone models that can
be connected to this unit.
1
Place the iPod or iPhone on the
iPod/iPhone dock.
2
Press FUNCTION repeatedly to
select the iPod & iPhone function.
3
Select a track by browsing through
the various iPod/iPhone content
lists on either the display of the
unit or of the iPod/iPhone.
• When “Remote UI Mode” is set to “Off”:
Operate the iPod/iPhone directly, browsing
the items on the iPod/iPhone display.
• When “Remote UI Mode” is set to “On”:
Operate the iPod/iPhone with the remote
control of the unit or the main unit,
browsing the items on the display of the
unit.
For details on “Remote UI Mode,” see page
34.
Example: Selecting a track from “Playlists”
when “Remote UI Mode” is set to “On”
1 Press M/m to select [Playlists] from
the iPod/iPhone content list, and
then press ENTER.
If the iPod/iPhone content list is not
displayed, press BACK repeatedly until
the first level of the iPod/iPhone content
list tree is displayed, then select the item.
2 Press M/m to select the desired
playlist, and then press ENTER.
Tracks in the selected playlist appear.
3 Press M/m to select the desired
track, and then press ENTER.
The selected track starts playback.
Tip
If “Network Standby” is set to “On,” the track that was
playing when the unit was last turned off will start playing
again when the unit is turned on again (only if the iPod/
iPhone was not removed from the iPod/iPhone dock of the
unit). The “Network Standby” mode is set to “Off” as the
factory setting. To save the information on the last track
played even when the unit is turned off, change the
“Network Standby” mode to “On.” For details on the
network standby mode setting, see page 18.
FUNCTION
M/m/ENTER
Track name Artist name
Elapsed time Track number