Sony NAS-SV20i - Manual (Page 60)

60 GB
2
Press TIMER.
3
When “TIMER Setting” appears,
press ENTER.
The “Start Time” setting display appears, and
the “cPLAY” indicator starts flashing
rapidly.
4
Set the starting time.
Press M/m to change the hour and press ,.
The cursor moves to the minute setting.
Perform the same operation to set the minute.
Press
</, to move the cursor.
Press and hold M/m to change the parameter
sequentially.
After you set the minute, press ENTER. The
“End Time” setting display appears.
5
Set the ending time.
Perform the same operation as that in step 4
to set the end time.
6
Select the source (“iPod &
iPhone,” “MUSIC SERVICES,” or
“DAB”*) you want to play.
When the Play Timer is set, “Complete.”
appears, and the “cPLAY” indicator lights
up on the display.
* UK model only
7
Press ?/1 to enter the standby
mode.
To go back to the previous display
Press BACK before you select the sound source in
step 6.
To cancel the timer setting
While the Play Timer is set, press TIMER. When
“TIMER Off” appears on the display, press
ENTER.
Notes
• The Play Timer is erased if you format the system
(page 63).
• If the unit is already turned on at the preset starting
time, the Play Timer will not be activated.
• The Play Timer may not be activated depending on the
status of the connected iPod/iPhone.
• If you select the Music Services function as the sound
source, the sound may not be output, depending on the
service provider or the network environment.