Sony DCR-DVD205 - Manual (Page 63)

63
Us
in
g t
h
e Re
co
rded
d
is
c (D
VD
-R
W/
DVD
+
R
W
)
You can record additional material on the
finalized DVD-RWs (VIDEO mode)/
DVD+RWs by following the steps below if
there is space to record on the disc.
When using the finalized DVD-RW (VR
mode) disc, you can record additional
material on the disc without any
additional steps.
• Use the AC Adaptor as power source to prevent
your camcorder from running out of power during
operation.
• Do not apply shock or vibration to your
camcorder, and do not disconnect the AC Adaptor
during operation.
• A DVD menu and a Photomovie created during
finalizing are deleted.
• When you use a double-sided disc, following
procedures are required on each side.
1
Connect the AC Adaptor to the DC
IN jack on your camcorder, then
connect the power cord to the wall
outlet.
2
Slide the POWER switch to turn on
your camcorder.
3
Insert the finalized disc into your
camcorder.
4
Touch t [SETUP].
5
For DCR-DVD105/DVD205/
DVD605/DVD705:
Touch
DISC SET t
[UNFINALIZE].
For DCR-DVD305/DVD755:
Touch
MEDIA SET t
[UNFINALIZE].
6
Touch [YES] t [YES], then touch
when [Completed.] appears.
If you have created a Photomovie or a
DVD menu in finalizing (p.59), the following
steps are required.
1
Connect the AC Adaptor to the DC
IN jack on your camcorder, then
connect the power cord to the wall
outlet.
2
Slide the POWER switch to turn on
your camcorder.
3
Insert the finalized disc into your
camcorder.
A confirmation dialog asking if you
record additional scenes appears.
4
Touch [YES] t [YES].
[Completed.] appears, then the screen
returns to the recording screen.
Using the Recorded disc (DVD-RW/DVD+RW)
Recording additional scenes after finalizing
DVD
+RW
When using a DVD-RW (VIDEO
mode) disc (Unfinalizing)
When using a DVD+RW