Specifications – Sony MDR-RF960RK User Manual

Page 13

Advertising
background image

13

GB

Specifications

General

Carrier frequency

913.5 – 914.5 MHz

Channel

Ch1, Ch2, Ch3

Modulation

FM stereo

Frequency response

MDR-RF920R : 20 – 20,000 Hz

MDR-RF960R : 10 – 22,000 Hz

Transmitter TMR-RF960R

Power source

DC 9 V: supplied AC power
adaptor

Audio input

phono jacks/stereo mini jack

Dimensions

Approx. 133

Ч

124

Ч

136 mm

(5

1

/

4

Ч

5

Ч

5

3

/

8

in.)

(w/h/d)

Mass

Approx. 195 g (7 oz.)

Headphones MDR-RF920R, MDR-RF960R

Power source

Supplied rechargeable nickel-
metal hydride batteries BP-
HP550 or commercially available
(size AAA) dry batteries

Mass

Approx. 270 g (9.6 oz.) incl.
batteries

Optional accessories

Audio cable

RK-G136 (stereo mini plug

y

stereo mini plug)

RK-C310,C320 (pin plug

×

2

y

pin plug

×

2)

Design and specifications are subject to change without
notice.

Problem

Distortion

Loud
background
noise

Solution

If the transmitter is connected to the
headphone jack, volume of the
connected audio/video equipment.

Change the radio frequency with the
CHANNEL selector on the
transmitter.

The headphones’ POWER indicator
light is weak or turned off.
• Charge the supplied rechargeable

batteries or if the POWER indicator
is still off after charging the
supplied rechargeable batteries, take
the headphones to a Sony dealer for
replacement of the rechargeable
battery.

If you connect the transmitter to the
LINE OUT or REC OUT jacks of an
audio reproducer, make sure that the
NOISE FILTER switch is set to OFF.

Move closer to the transmitter. As
you move away from the transmitter,
more noise is likely to be heard.

If the transmitter is connected to the
headphones jack, turn up the volume
of the connected audio/video
equipment.

MDR-RF920RK:
Change the radio frequency with the
CHANNEL selector on the
transmitter, then tune the headphones
with the TUNE control.
MDR-RF960RK:
Change the radio frequency with the
CHANNEL selector on the
transmitter, then press the TUNE
button again.

The headphones’ POWER indicator
light is weak or turned off.
• Charge the supplied rechargeable

batteries or if the POWER indicator
is still off after charging the
supplied rechargeable batteries, take
the headphones to a Sony dealer for
replacement of the rechargeable
battery.

If you connect the transmitter to the
LINE OUT or REC OUT jacks of an
audio reproducer, make sure that the
NOISE FILTER switch is set to OFF.

Advertising
This manual is related to the following products: