Sony MDR-RF960RK - Manual (Page 8)

8 GB
C To connect to TV, etc.
If noise occurs when the transmitter is
connected to your TV or VCR, set the
NOISE FILTER switch to ON.
Notes
• If you connect the transmitter to LINE OUT or
REC OUT jacks of an audio reproducer such as an
MD player or CD player, do not set the NOISE
FILTER switch to ON. Otherwise, volume will be
limited.
• The NOISE FILTER switch is active only in the
case of the connection shown in diagram A on
page 7 and C. In diagram B, the switch has no
effect.
• When the transmitter is placed on or near a TV, it
may pick up a noise.
In such case, place the transmitter away from the
TV.
INPUT
A
INPUT
DC IN 9V
!
L
R
B
NOISE FILTER
ON
OFF
CHANNEL
1
2
3
2
Connect the supplied AC power
adaptor to the transmitter.
Notes
• Use only the supplied AC power adaptor. Do not use
any other AC power adaptor.
• If the connected equipment has the AVLS (Automatic
Volume Limiter System) function, be sure to turn the
function off when using the transmitter. Otherwise,
you will have to turn up the volume of the
headphones, and that may cause noise.
• Do not place the transmitter near a fluorescent lamp,
etc. when using the system.
TV, etc.
to stereo mini jack
to INPUT B
jacks
Right channel
(red)
Left channel
(white)
Polarity of the plug
Connecting cord
(supplied)
Transmitter
Transmitter
AC power
adaptor
(supplied)
to an AC
outlet
to DC IN 9 V jack