Sony MDS-PC3 - Manual (Page 10)

10 GB
8
When the dialog box indicating the completion of the installation
appears, click “Finish.”
This completes the setup process.
Be sure to restart the computer. If not, the software will not
function properly.
Be sure to close the dialog box activated by executing InstallDlg.exe
before connecting the system stereo component to the computer.
Now, you can proceed to the next preparation steps: connecting the
system stereo component to the computer, installing the USB
drivers, and then verifying the status of the installed devices
according to the procedures described on the following pages.
Before starting M-crew
Open the “Readme” file and read it.
To open the “Readme” file, go to the Start menu and select “Programs”
and “M-crew,” and then click “Readme.”
Notes
• A folder is created as a result of the installation. This folder is used by the
software. Do not erase, move, or change its contents.
• If the required driver and other items have already been installed, a dialog
box for your confirmation will appear during the installation.