Sony MDS-PC3 - Manual (Page 28)

28 GB
Problem Cause/countermeasure
The system stereo component
does not respond. t Check that the connections have been made
properly (page 11).
t Disconnect the connecting cables and then
reconnect them.
t Try disconnecting the USB cable from the
system stereo component and from the
computer, and then connecting it again.
The displayed name of the MD or
CD does not match the disc’s
contents. t Click the Reload button.
t Restart M-crew. Should the problem persist,
the data in the Disc Library may be corrupted.
Enter the names again.
No screen response or screen
error. t Turn the power of the system stereo
component off and on, and then restart
M-crew.
t Try disconnecting the USB cable from the
system stereo component and from the
computer, and then connecting it again.
t Start up another often-used application and
verify that the computer functions properly.
t After uninstalling the M-crew software (page
19), try re-installing it (page 7).
Text input, recording, editing
etc., cannot be done. The disc’s protect tab may be set to write-protect.
t Slide the tab so that recording is possible.
The MD may be a commercial playback-only MD
(an MD with prerecorded tracks).
t Text input, recording, editing, etc., are not
possible on commercial playback-only MDs.