Connecting a projector – Sony PCG-R505GCP User Manual
Page 114
Connecting a projector
You can use a projector to display the actions and images on your computer's screen (LCD).
To connect a projector
1.
Plug the projector into an AC outlet.
2.
Turn off the computer.
3.
Plug the display cable into the Monitor (VGA) port
on the computer.
4.
Plug the other end of the display cable into the projector.
5.
Plug the audio cable into the Headphone jack
on the computer.
6.
Plug the other end of the audio cable into the projector.
7.
Turn on the projector (if it is not already on), and then turn on the computer.
8.
Press the Fn+F7 key combination to toggle the display between your computer and the projector. See
for more information.
Connecting a Projector
See the guide that came with your projector for more information on its installation and use.
Page 114