Alpine CDA-117 - Manual (Page 31)

29
-EN
3
Press ESC for at least 2 seconds to cancel the
INSTANT REPLAY mode.
The unit returns to usual SIRIUS broadcasting mode.
Time display example during REPLAY playback (Instant Replay
Mode only)
Changing the Display
Text information, such as the channel name, artist name/feature and
song/program title, is available w th each XM or Sirius channel. The unit
can display this text information as explained below.
1
In XM or SIRIUS mode, press VIEW.
Each time you press this button, the display changes as shown
below.
XM mode:
SIRIUS mode:
*1 When ADF is turned OFF, this information is not displayed
(refer to “Setting the Auxiliary Data Field Display (XM only)”
on page 29).
Displayed in 1 line when text amount is small.
*2 When the channel “0” or “255” is selected, the SIRIUS ID
number is displayed.
*3 Displayed only during instant replay.
Notes
• When the “Text Scroll” (Refer to “Scroll Setting (Text Scroll)” on
page 23) is set to “Auto,” the display scrolls continuously. When the
“Text Scroll” is set to “Manual,” the display scrolls only once after any
function is performed (PRESET, BAND, SEARCH, etc.). “Channel
No.”, “Calendar” and “Clock” displays do not scroll.
• Depending on the model, the display may differ from the one shown
above.
Setting the Auxiliary Data Field Display (XM
only)
The XM Auxiliary Data Field (ADF) display can be sw tched on or off.
There is no ADF function for the SIRIUS receiver.
1
Press and hold SETUP for at least 2 seconds to activate the
SETUP selection mode.
2
Turn the Rotary encoder to select the XM mode, and then
press ENTER
.
Bluetooth
*1
 General  Display  Tuner
*2
/HD Radio
*3
 XM
*4
/
SIRIUS *5  Bluetooth
*1 Displayed only when INT Mute is OFF and the mode is set to
other than Bluetooth Audio.
*2 Not displayed when HD Radio Tuner module is connected.
*3 Only when HD Radio Tuner module is connected.
*4 Only when XM Radio is connected.
*5 Only when SIRIUS Radio is connected.
3
Press ENTER  to activate the XM ADF mode.
4
Turn the Rotary encoder to select XM ADF ON/OFF, and
then press ENTER
.
When setting to ON, Auxiliary Data Field is displayed by pressing
VIEW (refer to “Changing the Display” on page 29).
5
Press and hold SETUP for at least 2 seconds to return to
normal mode.
Notes
• Pressing ESC returns to the previous SETUP mode.
• If no operation is performed for 60 seconds, SETUP is canceled.
Play Position Indicator
Progress Bar
Volume Level Play Time (Remaining
time for INSTANT REPLAY)
Channel No.
*1
Channel No./Channel Name (Blank)
(Blank) Category Name
Channel No./Channel Name Channel No./Channel Name
Additional info.
Channel No./Channel Name
Song Name
Category Name
Artist Name Clock
Channel No./Channel Name Calendar
*3
(Blank) Channel No./Channel Name
Category Name
Channel No./Channel Name Channel No./Channel Name
(Blank)
Channel No./Channel Name Calendar
Clock
Song Name *2
Progress Bar Channel No./Channel Name
Remaining time of instant replay Category Name
Composer Name
Artist Name