Alpine CDA-117 - Manual (Page 36)

34
-EN
Direct Search Function
The un t’s direct search function can be used to search for an album,
song, etc., more efficiently. In Playlist/Artist/Album/Song/Podcast/
Genre/Composer/Audiobook mode, you can quickly target any song.
1
In the search mode, press any one of the preset buttons (1
through 6) to quickly skip over a designated percent of
your song content.
Song search example:
If there are 100 songs in your iPhone/iPod, they are divided into 6
groups using percentages (shown below). These groups are
assigned to preset buttons 1 through 6.
Example 1:
Suppose the song you are searching for is located at around the
middle (50%) of your library: press button 4 to jump to the 50th
song and turn the Rotary encoder to find the desired song.
Example 2:
Suppose the song you are searching for is located near the end
(83%) of your library: press button 6 to jump to the 83rd song
and turn the Rotary encoder to find the desired song.
Select Playlist/Artist/Album/Genre/
Composer/Episode
Playlist/Artist/Album/Genre/Composer/Episode can be easily changed.
For example, if you listen to a song from a selected album, the album can
be changed.
1
Press  or  to select the desired Playlist/Artist/Album/
Genre/Composer/Episode.
Notes
• If the song search mode was used to select a song, this function is
inactive.
• If an album is selected during an artist search, other albums by that
artist are searchable.
• This function is inactive during shuffle (M.I.X.) playback.
Alphabet Skip Function
The in tial skip function is skipped to the next number, symbol or letter
such as from A to B, B to C.
You can skip in reverse order such as B to A by pressing .
1
During search mode, press  or  to perform the
Alphabet Skip Function.
A list is skipped to the next number, symbol or letter.
Note
• Titles are listed alphabetically, and can be skipped every 200 titles. If
there are fewer than 200 titles, titles beginning with the next
alphabetical character are selected.
Search Position Memory
During iPhone/iPod playback, you can quickly return to the
last-selected hierarchy level in the search mode.
1
Press ESC.
The hierarchy you selected last in the search mode is displayed.
Random Play Shuffle (M.I.X.)
The Shuffle function of the iPhone/iPod is displayed as M.I.X. on this
un t.
Shuffle Albums:
The songs on each album are played back in proper order. Upon
completion of all the songs on the album, the next album is selected
randomly. This continues until all albums have been played.
Shuffle Songs:
Song shuffle randomly plays back songs within a selected category
(playlist, album, etc.). The songs within the category are played just
once until all songs have been played.
1
Press 5 .
The songs are played back in random sequence.
MIX  *1  MIX *2  (off )  MIX 
*1 Shuffle Albums.
*2 Shuffle Songs.
2
To cancel M.I.X. play, select (off) with the above procedure.
Note
• If a song is selected in the album search mode before selecting M.I.X.
play, the songs will not play back randomly even when Shuffle Albums
is selected.
Shuffle ALL:
Shuffle ALL plays all songs in the iPhone/iPod randomly. Any one
song does not play back again until all songs have been played back.
1
Press 6.
The songs are played back in random sequence.
MIX ALL *  (off )  MIX ALL
* Shuffle ALL.
2
To cancel M.I.X. play, select (off) with the above procedure.
Note
• If Shuffle ALL is selected, the selected songs being played back in the
search mode are canceled.
Repeat Play
Only Repeat One is available for the iPhone/iPod.
Repeat One:
A single song is repeatedly played back.
1
Press  4.
The song is played back repeatedly.
RPT *  (off )  RPT
* Repeat One.
2
To cancel repeat play, select (off) with the above
procedure.
All 100 songs (100%)
0% 17% 33% 50% 67% 83%
Preset
buttons
1 2 3 4 5 6
Songs
1st
song
17th
song
33rd
song
50th
song
67th
song
83rd
song