Agilent Technologies Agilent 4396B - Manual (Page 29)

Front View
1. LCD displays measured results , softkey menus , current settings ,
system messages , error messages , and Instrument B ASIC programs .
2. 4 LINE 5 switch turns the analyzer ON and OFF .
3. 3.5 inch disk drive is used to store measurement results ,
instrument settings , display images , and Instrument B ASIC
programs .
4. CAL OUT (spectrum analyzer calibration output port)
supplies a reference signal (20 MHz, -20 dbm) for reference level
calibration.
5.
S input (spectrum analyzer input) receives a signal for a
spectrum measurement.
INST ALLA TION CA TEGORY I
6. RF OUT (RF signal output port) supplies a source signal for
network measurements .
Installation and Setup Guide 1-9