Agilent Technologies Agilent 4396B - Manual (Page 51)

Press
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
INITIALIZE DISK: YES . The message , \INITIALIZE DISK In Progress ,"
is displayed. After the disk is initialized, this
message is turned o .
Note The analyzer can use either a LIF (Logical Interchange F ormat) or a
DOS (Disk Operating System) format disk.
Saving Analyzer Settings
In the following example , use \SA TOUR" as the le name of the
analyzer settings you want to save .
Press 4 Save 5 . Press
FFFFFFFFFFFFFF
STATE .
The analyzer requests the le name you want to use for the saved
settings .
Entering the File Name
Note If a keyboard is connected, you can use it for le name entry . If not,
use the front-panel controls as described in the following steps .
Spectrum Analyzer T our 2-13