Sony VGP-XL1B2 - Manual (Page 45)

VGP-XL1B User Guide 39
Event:
Working with 1394 ports.
Comment:
• The changer come with two i.LINK ® ports. One port is used for
connecting to a host computer. The other port can be used to
connect/daisy-chain additional changers. Note: Sony only sup-
ports connecting four additional changers (for a total of five).
• Do not connect a 1394 device on the second port of the
changer while the changer is in use.
• Once a new 1394 device is plugged into a second i.LINK ® port
of the VGP-XL1B, both the host computer and the second 1394
device are re-enumerated by the operating system. This could
interrupt the current process running on the Changer drive.
Event:
The Changer carousel will not spin.
Comment:
Reset the power to the Changer. Turn the power off and wait
approximately 6 seconds, then turn the power on. The carousel
should spin one turn every time the power is reset.
Event:
System locks up or freezes after plugging in and/or unplugging the
Changer.
Comment:
Do not unplug or plug in the Changer while the Changer and sys-
tem are on.
Kansas2.book Page 39 Wednesday, February 1, 2006 8:00 AM